CargoBike

Description

Twin bike with luggage rack on the right side instead of pedals. Equipped with two gears on the drive train for heavy loads and steep hills.

Bike sizing:

• Riders from 1m50 up to 1m90.
• Seat moves back and forward like in a car
• Seat can be moved up and down in 5 steps
• Frame can be changed in length in 3 steps (S, M, L). This takes about an hour and tools are needed.
• The handle bar can be moved up/down and in/outFrame breaks down into 5 parts.
• This has proven to be a huge benefit in terms of maintenance, repair ability and transportation.
• Power: 250w e-assist (500W for North America)
• Max speed: 25km/h for Europe, 30km/h for North America (can be changed on the display background menu)
• Maximum rider weight: 120kg
• Frame material: 6061 T6 aluminum
• Approximated bike weight 60kg
• Can be equipped with an optional chair for a passenger.

Luggage rack:

• Rated for 50kg load
• 45cmx77cm platform

Battery:

• Samsung Lithium Ion
• 48v – 20Ah (other sizes also available)
• About a 40~60km range per battery depending on load and assist level
• Room for 2 spare batteries. This has proven to be a huge benefit in terms of bike readiness.
• Affordable and easy to replace/recycle at end of life.
• GenX™ drive by wire generator:
• gear count: 22, higher gears can be locked out.
• Pedaling Nm and Wattage limit: 70Nm – 500W
• Start-up gear can be set to preference.
• No maintenance
• Easy to replace
• Firmware can be updated.

Traction motor:

• 500W RMS(250W drive by wire, 250W Assist), 1200W peak. High efficient sine wave permanent magnet motor with active fan and aluminum housing.
• Gearbox: All hardened steel gears and differential in oil bath. 2 gears are controlled by a manual gear changer.
  • 220Nm in low gear – 12km/h max speed – extreme hill climbing abilities
  • 90Nm in high gear – 25km/h max speed
• Modular – easy to maintain and replace.
• Standard regenerative braking up to 550W (can be adjusted on the display background menu)
• The assist strength can be set on the display.
• Reverse mode (can be controlled by throttle if present)

Controller/lcd:

• Sine wave 500W RMS; 1200W peak. Embedded into the bike frame.
• Equipped with temperature sensor and automatic temperature rollback to protect equipment.
• Can be equipped with a throttle. The further the throttle is engaged, the more torque you get for precise control of the bike. It can legally be used in Europe as a walk assist if limited to 6km/h. This has proven to be useful for extra control of the bike inside a warehouse.
• Large LCD with USB output for charging a device
• 11 background display parameters that can be changed to customize your bikes characteristics.
• Firmware can be updated.
• Rear wheels: 3.5-10 aluminum rims, motorcycle style disc brakes. Rated for 200 kg/wheel.
• Front wheel: 20″ cast magnesium bicycle wheel with mechanical disc brakes. Equipped with ebike anti flat tire.
• Front fork: downhill style heavy duty suspension fork
• The front and rear mud guards.

lights:

• Front led light with high brightness. Embedded horn that can be controlled from the handlebars
• 4 Rear led lights with embedded brake light feature. (brightness goes up when brake is operated)

Dimensions

• • Width: 1 m
  • Length: 1.81 m